Share today: the use, maintenance, storage and transportation of high temperature adhesive tape.

(1) It is not allowed to connect (match) tapes of different varieties, specifications, models, strengths and layers together.

(2) When the tape is found to be damaged in the early stage, the reason should be found in time and repaired to prevent the occurrence of adverse consequences.

(3) The tape should be placed in rolls without folding, and it should be turned once every season when it is stored for too long.

(4) The basic diameter of the conveyor roller and the minimum pulley diameter of the conveyor belt shall comply with relevant regulations.

(5) When the conveyor is equipped with baffles and cleaning equipment, the abrasion of the adhesive tape should be prevented.

(6) Cleanliness is the basic condition for the excellent operation of the belt, and foreign substances will affect the eccentricity, tension difference and even cracking of the belt.

(7) The joint of conveyor belt is better bonded by hot vulcanization, so as to improve reliability and adhere to high useful strength.

(8) When loading and unloading the conveyor belt, it is better to use the crane, and use the rigging with cross beam to lift it smoothly, so as to prevent the belt edge from being damaged. Do not arbitrarily load and unload the conveyor belt, causing loose coils and loose sleeves.

(9) Don't make the tape snake or creep, stick to dragging the roller, make the vertical roller flexible, and keep the tension moderate.

(10) Tape should be stored in the warehouse to prevent sun and rain; Contact with organic solvents of acid, alkali and oil is prohibited, and it is clean and boring. It is 1m away from the discovery equipment and the room temperature is between-15℃ and 40℃.

(11) The type and specification of adhesive tape should be reasonably selected according to the application needs and specific conditions.