What should I pay attention to when storing battery energy storage tape in warehouse?

When the battery energy storage tape is stored in the warehouse, you should pay attention to the following matters:

I. Environmental temperature and humidity

Temperature control: the temperature of the warehouse should be kept in an appropriate range. Generally speaking, the ideal storage temperature is 18-25 degrees Celsius. Too high temperature may cause the adhesive of the tape to soften and flow, which will affect the viscosity and performance of the tape. For example, when it is hot in summer, if the warehouse does not have proper cooling measures, quality problems may occur with the adhesive tape. On the contrary, if the temperature is too low, the adhesive tape may become hard and brittle, and it is easy to break when used.

Humidity adjustment: It is best to keep the relative humidity in the warehouse at 40%-60%. If the humidity is too high, the adhesive tape can easily absorb water, which may reduce the viscosity of the adhesive and may also cause the adhesive tape to be moldy. If the climate in the area is humid, it is necessary to consider using dehumidification equipment to control humidity.

Second, packaging and stacking

Packaging integrity: ensure that the packaging of battery energy storage tape is intact. Packaging can prevent dust, moisture and other external factors from eroding the tape. If the package is damaged, it should be replaced in time or other protective measures should be taken, such as winding with plastic film.

Proper stacking: When stacking battery energy storage tapes, don't stack them too high, so as to avoid excessive extrusion of the bottom tape. Usually, the stacking height should not exceed a certain limit, and the specific height should be determined according to the packaging strength of adhesive tape and the bearing capacity of warehouse shelves. Moreover, it is necessary to ensure neat stacking to prevent the tape from slipping and dumping, causing packaging damage.

III. Safety and fire prevention

Keep away from fire sources: battery energy storage tape is usually flammable. Fireworks should be strictly prohibited in the warehouse, and it should be far away from welding, cutting and other work areas that may generate sparks. Set up obvious "No Smoking" signs in the warehouse, and educate the personnel entering the warehouse on fire safety.

Fire fighting facilities: the warehouse should be equipped with sufficient fire fighting facilities, such as fire extinguishers and fire hydrants, and these fire fighting facilities should be inspected regularly to ensure their normal use. At the same time, it is necessary to plan the fire exits to ensure that the exits are unobstructed, so that people and materials can be evacuated quickly in case of fire.

Fourth, other aspects

Regular inspection: regularly inspect the battery energy storage tape stored in the warehouse. The inspection contents include whether the packaging of the adhesive tape is intact and whether there are signs of deterioration (such as discoloration and odor). If there is a problem with the tape, it should be isolated and disposed of in time.

First-in first-out principle: When using adhesive tape, the principle of first-in first-out should be followed. This can ensure that the adhesive tape is used within the warranty period and avoid the deterioration of the quality of the adhesive tape due to long-term storage.